LLC Resonant Converter Design Calculator
Half-bridge LLC with a center-tapped rectifier, with the tank derived from the spreadsheet method (λ from the maximum frequency, Q for no-load ZVS) or from Ln and a peak gain margin, then checked with first harmonic approximation (FHA). Enter your specs, then slide the bus voltage and load to watch the switching frequency, gain, ZVS, the resonant and magnetizing currents and the live circuit update.
Tank derivation (step by step)
Derived component values
Calculated from your specifications. These are exact values: choose real parts in the next section.
Enter the real parts you will use, for example the nearest standard values. Leave 0 to keep the derived value. The gain curve, frequencies, currents, stresses and losses below are all calculated with these actual values.
Live circuit
Gain curve (FHA)
Operating point results (actual components)
Output capacitor, MOSFETs and rectifiers (with the actual components)
Voltage and current of each device
Power, losses and temperature
Live waveforms
FHA design with approximate time-domain waveforms. Real LLC gain differs from FHA, especially far below resonance and at light load, so confirm the design with simulation and measurement. Core loss and controller power are entered as an estimate. The half bridge runs from a high-voltage bus: build and test with proper safety precautions.
