Ćuk Converter Design Calculator
Enter your specs. Every value, rating, loss and the live circuit and waveforms update as you type.
1. Specifications
2. Topology and devices
3. Operating point
Live circuit
Operation mode: switching period
Q1 on (C1 feeds L2 and the load)Q1 off (L1 recharges C1)Idle, rectifier off (DCM)
Duty cycle
L1 (input) ripple
L2 (output) ripple
Output ripple
C1 voltage
Input current
L2–C1 resonance
Component value selection
Input inductor L1
Output inductor L2
Coupling capacitor C1
Output capacitor
Input capacitor
MOSFET Q1
Schottky diode D1
Voltage and current of each device
Power, losses and temperature
Efficiency
Pout ÷ Pin at this load.
Input power
Total loss
Q1 junction temp.
D1 / Q2 junction temp.
Q1 conductionQ1 switching + CossGate driveD1 / Q2L1 + L2 DCRCapacitor ESR
Live waveforms
Estimates for first-pass design. Core loss, diode reverse recovery, inductor coupling and layout parasitics are not modeled, so expect real efficiency a little lower. The output is negative with respect to GND. Confirm with your controller datasheet.
